BDBTC - 724222-COMP A

  • MSDS: BDBTC
  • Manufacturer: PRATT AND LAMBERT
  • Product Name: 724222-COMP A
  • National Stock Number: 8010-00-142-9279
Product Identification

Product ID:724222-COMP A
MSDS Date:01/01/1985
FSC:8010
NIIN:00-142-9279
Kit Part:Y
MSDS Number: BDBTC

Responsible Party
PRATT & LAMBERT
16116 E 13TH ST
WICHITA, KS 67201
US

Cage: PRATT

Contractor
PRATT AND LAMBERT INC
2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

2-ETHOXYETHANOL

RTECS: KP5685000

Fraction By Weight: 15%

ACGIH TLV: 5 PPM


STRONTIUM CHROMATE

RTECS: WK8600000

Fraction By Weight: 25%

ACGIH TLV: 3.00 G/KG


ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: 15%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 7.5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <0.5%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TALC (PIGMENT)

CAS: 14807-96-6

RTECS: MW2700000

Fraction By Weight: 10%

OSHA PEL 2 MG/M3; 20 MPPCF

ACGIH TLV: 2 MG/M3; 15 MPPCF


SILICA, CRYSTALLINE

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <1%

OSHA PEL 0.1000 MG/M3

ACGIH TLV: 0.1000 MG/M3


SILICA, AMORPHOUS-HYDRATED (PIGMENT)

CAS: 63231-67-4

RTECS: VV7340000

Fraction By Weight: 5%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3


TITANIUM DIOXIDE (PIGMENT)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5%

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3


STRONTIUM CHROMATE (SARA 313) (CERCLA) (PIGMENT)

CAS: 7789-06-2

RTECS: GB3240000

Fraction By Weight: 20%

OSHA PEL 0.1000 MG/M3 *

ACGIH TLV: 0.0005 MG/M3

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


4.19 LB/GAL LESS WATER & NEGLIGIBLY PHOTOCHEMICALLY

RTECS: 9999999VO

Hazards

Effects of Overexposure:IRRIT OF NOSE,THROAT,EYES & POSS DIZZINESS &
NAUSEA.SPRAY MIST CONTN LEAD.

First Aid

First Aid:INHAL:REMOVE FR EXPOSR& PROVID FRESH AIR.SPLASH EYES-FLUSH
IMMED W/LG AMTS OF WATER FOR 15 MIN.SPLASH SKIN:REMOV CONTAM
CLOTHING & WASH ALL AFFECT AREA W/WATR.INGEST:DO NOT INDUC
VOMITNG.CONSULT A DR. IMMED IN ALL CASES.

Fire Fighting

Flash Point:44F, 6C
Extinguishing Media:CLASS B EXTING, CARBON DIOXIDE, DRY CHEM OR ALCOHOL
FOAM
Fire Fighting Procedures:SELF CONTAINED BREATH APPARAT,WATER MAY BE
INEFECTIVE.
Unusual Fire/Explosion Hazard:KEEP CONTNRS TIGHTHLY CLOS.ISOLAT FR
HEAT,ELECTR EQPMT,SPARKS & OPN FLAME.DO NOT APPLY TO VRYHOT SUR

Accidental Release

Spill Release Procedures:REMOV ALL SOURCES OF IGNIT (FLAMES,HOT
SURFACES,ELECTRICAL, STATIC OR FRICTIONALSPARKS).VENTILAT AREA &
AVOID BREATHING. VAPORS.REMOV W/ INERT ABSORB & NON-SPARKING
TOOLS.STEPS MUST BE TAKN TO PREVNT CONTAM OF GROUND WATR OR
STREAMS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOV 120 F.STORE LG
QUANTITIES IN COMPLIA W/OSHA 1910.106.CONTNRS SHLD BE GROUNDED &
BONDED TO THE RECEIVING CONTNR.
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTAINER. DO NOT USE
UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ & FULLY UNDERSTOOD BY
THE USER.

Exposure Controls

Respiratory Protection:NIOSH APPRVD MECH RESPIRAT TO REMOV OVERSPRAY
WHN SPRAYING IN OUTDR
Ventilation:PROVID GEN DILUT/LOC EXHAUST VENT TO KP CONCENT BELO ACER
TL
Protective Gloves:SOLVENT,IMPERME
Eye Protection:SAFETY EXEWR
Other Protective Equipment:PROTECTV EQPMT TO PRVNT SKN CONTCT.SE
OSHA,29 CFR 1910.1025
Supplemental Safety and Health
SEE P/N B 8010001429279.KEY1:J1.

Chemical Properties

Boiling Pt:B.P. Text:223-277F
Vapor Density:>AIR
Evaporation Rate & Reference:Percent Volatiles by Volume:63

Stability

Stability Indicator/Materials to Avoid:YES
AVOID COMTCT W/STRONG ACIDS OR AKALINE MATERIALS.
Stability Condition to Avoid:FIRES,HEAT & HOT SURFACES.
Hazardous Decomposition Products:BURNING WILL PRODUCE SMOKE & OXIDES OF
CARBON & LEAD.
Conditions to Avoid Polymerization:DO NOT ADD DRIERS OR REACTIV CHEM
W/O TECHN SUPERVISION.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORD W/LOCAL,STATE & FEDERAL
REGULATIONS.INCINERATIN EPA APPRVD FACILITY.DO NOT INCINERAT CLOSED
CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.